MISCELLANEOUS DRILL BITS

CALL US TODAY

MISCELLANEOUS DRILL BITS

A scotch eyed auger drill bit is used to bore holes in timber for hand operation where there is no electrical power. It is great for drilling holes in thatch poles to insert threaded rods. A branch or dowel is inserted in the eye of the auger to become the handle to turn the auger drill bit by hand. A screw extractor is a tool for removing broken or seized screws. There are two types: one has a spiral flute structure, commonly called an easy out, the other has a straight flute structure. Breast Drills are small, portable hand drill to drill the holes in bit blanks in which diamonds are to be set. The upper end of the drill is provided with a plate against which the breast of the operator is pressed to force the bit into the work.

BLU-MOL SDS PLUS POINT CHISEL DRILL BIT

BLU-MOL SDS PLUS POINT CHISEL DRILL BIT

Concrete (point) chisels are used primarily on concrete. Having a sharp tip rather than a sharp edge means that this chisel is better suited to cutting through concrete.

BM0421535 (250mm)

BLU-MOL TCT MASONRY CORE CUTTER BIT M22

Hollow Core Bits Are Designed To Be Used With Rotary Hammers. It is used for boring out in brickwork or Aerated Concrete.

BM0422100 (30 x 72mm)
BM0422101 (40 x 72mm)
BM0422102 (50 x 72mm)
BM0422103 (65 x 72mm)
BM0422104 (80 x 72mm)
BM0422105 (110 x 72mm)

BLU-MOL SDS PLUS MANDREL 110MM + BIT

Hollow core bits accessory designed to be used with rotary Hammers. It is used for boring out in brickwork or Aerated Concrete.

BM0422106 (110 + Bit)

BLU-MOL PLUG CUTTER

There is a variety of different plug cutters in the range, depending on the diameter hole that needs to be plugged. The plug cutter is measured on the inside diameter. Always make sure that the hole is drilled to correspond to the correct plug cutter. Bit produces accurate plugs from any type of wood. Precision-ground cutters for precise fitting. 1/4″ Shank size fits most standard chucks. Use to cut straight/parallel plugs. Chamfered blade tips for easy start.

BM0650405 (Size: 10mm)
BM0650406 (Size: 12mm)
BM0650407 (Size: 14mm)
BM0650408 (Size: 16mm)
BM0650409 (Size: 6mm)
BM0650410 (Size: 8mm)

BLU-MOL CHUCK AND KEY SET 1/2" X20 FEMALE 13MM

Drill replacement chuck and key.

BM1310011

BLU-MOL CHUCK AND KEY SET 13MM & SDS ADAPTOR

Drill replacement chuck and key with SDS adapter in order to produce the extra force and torque needed to drill through concrete, stone and other tough materials.

BM1310012

BLU-MOL CHUCK AND KEY SET 3/8" X24 FEMALE 13MM

Drill replacement chuck and key.

BM1310013

BLU-MOL CHUCK KEY 10-13MM

Drill replacement chuck and key.

BM1310014 (Size: 10-13mm)

BLU-MOL X TCT FORSTNER BIT 35X90MM

Forstner Bits Drills a Flat-Bottomed Hole, making them a necessary tool for many hardware installations where a precise depth of mortise is required. They can be used along with a drill press to drill angled holes, holes that partially overlap, and holes on the edge of the material.

BM1401315

BLU-MOL X TCT HINGE CUTTER BIT 35X56MM

The Hinge Cutter Drill Bit delivers precise-fitting holes in wood. It offers high cutting quality from two chamfered cutters that produce very accurate results. The bit is intended for drilling true-to-size and clean-fitting holes, e.g. manufactured furniture, kitchen fittings and interior fittings. Use this drill bit for drilling soft and hard wood. It has a cylindrical shank and is best compatible with bench drills.

BM1401316

BLU-MOL X OPEN END FORSTNER BIT 35X90MM

Open-end Forstner bits are mainly used for drilling on wood materials with smooth drilling, easy metal filings exit. The drilling hole is clean and accurate.

BM1401317

BLU-MOL SDS PLUS CHISEL GOUGE 22X250MM

The Gouge is a Chisel with a Rounded or Angular tip used to cut curves and hollows. The tools and materials you will need are a gouge, a mallet, a vice and a workpiece. The steel ring around the head helps withstand mallet blows. The bevel of the blade is usually curved to help scoop in and out of the wood.

BM0421534

FOX SDS PLUS GOUGE CHISEL DRILL BIT 280 X 22MM

The Gouge is a chisel with a rounded or angular tip used to cut curves and hollows. The tools and materials you will need are a gouge, a mallet, a vice and a workpiece. The steel ring around the head helps withstand mallet blows. The bevel of the blade is usually curved to help scoop in and out of the wood.

FOX5165

FOX F/G WOOD RASP PRO DRILL BIT

For use on all drilling machines. Ideal for drilling into metal and plastic.

FOX2100 (Size:3.0x60mm)
FOX2105 (Size:4.0x75mm)
FOX2110 (Size:5.0x86mm)
FOX2115 (Size:6.0x90mm)
FOX2120 (Size:6.5x90mm)
FOX2125 (Size:8.0x95mm)
FOX2130 (Size:10.0x105mm)

FOX HSS HEX STUB DRILL BIT

For use on all drilling machines. Ideal for drilling into metal and plastic.

FOX2135 (Size:3.0x47mm)
FOX2140 (Size:3.2x47mm)
FOX2145 (Size: 3.5x47mm)
FOX2150 (Size:4.0x53mm)
FOX2155 (Size:5.0x59mm)
FOX2160 (Size:6.0x59mm)
FOX2165 (Size:7.0x59mm)
FOX2170(Size:8.0x60mm)
FOX2175 (Size:9.0x84mm)
FOX2180 (Size:10.0x89mm)

FOX SDS PLUS FLAT CHISEL DRILL BIT 280MM x 20MM

Concrete (point) chisels are used primarily on concrete. Having a sharp tip rather than a sharp edge means that this chisel is better suited to cutting through concrete.

FOX5155

FOX SDS PLUS WIDE CHISEL DRILL BIT 280 X 40MM

Concrete (point) chisels are used primarily on concrete. Having a sharp tip rather than a sharp edge means that this chisel is better suited to cutting through concrete.

FOX5160

FOX PROCELAIN PRO DRILL BIT

Diamond-tip drill bit for porcelain tile. The diamond-coated end of the tile bit is specifically made to drill through tile and porcelain.

FOX7800 (Size: 5.0mm)
FOX7805 (Size: 6.0mm)
FOX7810 (Size: 8.0mm)
FOX7815 (Size: 10.0mm)

FOX TILE AND GLASS SPEAR PRO DRILL BIT

The Glass and Tile drill bit it is used for drilling into glass and medium wear tiles. Profiled tungsten carbide tip.

FOX7820 (Size: 4.0mm)
FOX7825 (Size: 5.0mm)
FOX7830 (Size: 6.0mm)
FOX7835 (Size: 8.0mm)

MITCO AUGERBIT SCOTCH EYE DRILL BIT

Heat treated Augerbit scotch eye. Coated with anti-corrosive oil. Two cutting edges and spurs. For all types of soft wood. Use in hand braces.

MTC2331300 (Size:13.0x500mm)
MTC2331600 (Size:16.0x500mm)
MTC2331750 (Size:17.5x500mm)
MTC2331900 (Size:19.0x500mm)
MTC2332200 (Size:22.0x500mm)
MTC2332550 (Size:25.5x500mm)

GROZ SCREW EXTRACTOR SET 5 PIECE 1MM-5MM CS

Screw extractor to remove screws or bolts that broke off . Drilling a pilot with correct size drill bit. The extractor bit is turned in using a spanner. The anticlockwise thread that loosens the bolt or screw.
Content: 1mm, 2mm, 3mm, 4mm, 5mm

GRO1205

OMNI EXTRACTOR SCREW SET

Screw extractor to remove screws or bolts that broke off . Drilling a pilot with correct size drill bit. The extractor bit is turned in using a spanner. The anticlockwise thread that loosens the bolt or screw.

SHA0790 (5 Piece)
SHA0791 (6 Piece)
SHA0792 (8 Piece)

STAHLWILLE SCREW EXTRACTOR SET 6 PIECE 900

Screw extractor to remove screws or bolts that broke off . Drilling a pilot with correct size drill bit. The extractor bit is turned in using a spanner. The anticlockwise thread that loosens the bolt or screw.

STW96710101

SYKES PICKAVANT THREAD RESTORER 01560000, 01560100, 01560200, 01560300

Thread restorer (thread file) is a tool used to fix threads on nuts or bolts that have become damaged. One type of thread restorer is a thread restoring file, among others.

SYK015600 (Type:BSW/BSF)
SYK015601 (Type:SAE/UN)
SYK015602 (Type:METRIC)
SYK015603 (Type: BSP)

GROZ BREAST DRILL 12MM (FRE)

Portable hand drill for drill holes in work. The upper end of the drill is provided with a plate against which the breast of the operator is pressed to force the bit into the work.

GRO1800

STANLEY HANDYMAN HAND DRILL 8MM 03-608

Portable hand drill for drill holes in work. The upper end of the drill is provided with a plate against which the breast of the operator is pressed to force the bit into the work.

STA2833

J AND G HOLDINGS (PTY) LTD

Shortcuts provided at the bottom of the page to make contact with us easier.